Dallas Painting – How To Properly Paint A Brick Or Rough Surface?
Homeowners often update the appearance of their houses with a coat of fresh paint. However if you’re considering painting the ‘bricks’ on your home then there are a few things you should consider before you break out the spray guns and throw a party!
Painting brick, block, or stone is not like painting anything more you will ever have to paint. The major difference is volume of labor needed and the amount of material. These kinds of surfaces will use two times as much material as any other. Being that these surfaces are so porous, they act like a sponge.
The labor comes in with the quantity of effort required to work the material into these surfaces. It is slow, hot work. The materials used as far as paint are not any different from any other paint except there are some special products that do about the same job as regular paint. They may be a little heavier for better hiding. Like wood and metal, there are fillers that can be used on the rough surfaces. They are latex or oil-based. They’re worked into the surface with either a stiff brush designed for this work or a heavy roller.
Yes, you’ll use a big amount of filler and only get about two hundred square feet per gallon. the advantage to using filler is it smooths the surface meaning you can use less primer and less paint. Sometimes you may see someone trying to use drywall compound in the place of block filler. This is not a good practice. Using a product for anything that it was not meant for can cost more than using the right home painting product.
The one thing you can count on is they will fail. Leaving you nothing apart from an identical issue you started with and a big mess to wash up. If you are feeling confident in your capability in employing a spray to apply the filler or paint, that’s's great too. Just be sure to cover any surrounding surfaces not being painted and remember even if you employ a sprayer the material will still have to be gone over with a roller to be certain the material is well worked into the surface.
|
|
ROBERTSHAW 41-404 HOT SURFACE IGNITOR FOR WEIL MCLAIN $19.35 |
|
|
NEW SEALED FLAME SENSOR HOT SURFACE IGNITION FAST ICP $29.50 |
|
|
NEW SEALED UNIVERSAL HOT SURFACE FLAME SENSOR W/ WIRE $25.50 |
|
|
Protech 62-22868-93 Hot Surface Ignitor 120v. (New) $15.99 |
|
|
Ez-Flo 77563 Flat Carbide Hot Surface Igniter $20.43 |
|
|
Ez-Flo 77564 Flat Carbide Hot Surface Igniter $20.43 |
|
|
Ez-Flo 77565 Flat Carbide Hot Surface Igniter $20.43 |
|
|
Ez-Flo 77566 Flat Carbide Hot Surface Igniter $20.43 |
|
|
Ez-Flo 77568 Flat Carbide Hot Surface Igniter $20.43 |
|
|
Ez-Flo 77569 Flat Carbide Hot Surface Igniter $22.30 |
|
|
White Rodgers Hot Surface Igniter 5-1/4” leads 767A-357 $31.99 |
|
|
White Rodgers Hot Surface Igniter 5-1/4” leads 767A-361 $31.50 |
|
|
White Rodgers Hot Surface Igniter 5.313” leads 767A-366 $31.99 |
|
|
White Rodgers Hot Surface Igniter 5-1/2” leads 767A-369 $29.90 |
|
|
White Rodgers Hot Surface Igniter 5-1/4” leads 767A-370 $29.50 |
|
|
White Rodgers Hot Surface Igniter 19-⅛” leads 767A-371 $29.90 |
|
|
White Rodgers Hot Surface Igniter 5-1/4″ leads 767A-372 $29.90 |
|
|
White Rodgers Hot Surface Igniter 5-1/4″ leads 767A-373 $24.99 |
|
|
SEALED FLAME SENSOR HOT SURFACE IGNITION S102527773700 $21.50 |
|
|
NEW TRANE CNT03776 WHITE RODGERS 50E47-860 HOT SURFACE IGNITION CONTROL HVAC $90.00 |
|
|
3 Honeywell Universal Replacement Furnace & Boiler Hot Surface Igniter NEW !!! $29.99 |
|
|
Ez-Flo 77567 Flat Carbide Hot Surface Igniter $20.43 |
|
|
PP201 HA1100 DESA HSI Hot Surface Ignitor $42.37 |
|
|
UNIVERSAL HSIURK120V413 120VOLT HOT SURFACE IGNITER KIT 163821 $22.00 |
|
|
UNIVERSAL HSIURK120V406 120 VOLT HOT SURFACE IGNITER KIT 163813 $22.00 |
|
|
UNIVESAL HSIURK120V401 120 VOLT HOT SURFACE IGNITER KIT 163822 $22.00 |
|
|
Supco IG401 Flat Silicon Carbide Hot Surface Furnace Igniter $14.99 |
|
|
Supco IG412 Flat Silicon Carbide Hot Surface Furnace Ignitor $12.99 |
|
|
IGNITOR, HOT SURFACE ROBERTSHAW 41-409 $11.99 |
|
|
Supco IG405 Flat Silicon Carbide Hot Surface Furnace Igniter $14.99 |
|
|
Supco IG403 Flat Silicon Carbide Hot Surface Furnace Ignitor Kit $14.99 |
|
|
OEM Rheem Ruud Weather King Flat Hot Surface Ignitor $21.99 |
|
|
Hot Surface Ignitor Control Board – Coleman- 7990-319 P $119.00 |
|
|
Uni-Line Hot Surface Furnace Ignitor Trane 41-410 $40.75 |
|
|
TRANE FURNACE HOT SURFACE IGNITOR (IGNOOO23) $20.00 |
|
|
Robertshaw hot surface furnace ignitor #41-405 L@@K $20.00 |
|
|
Robertshaw Hot Surface Furnace Ignitor 41-406, 1/2″ $25.99 |
|
|
WHITE-RODGERS F767A-356 HOT SURFACE FURNACE IGNITER 120V 5.0AMP $45.00 |
|
|
Norton Model 271H 0834 Furnace Hot Surface Ignitor HSI $23.75 |
|
|
ROBERTSHAW 41-402 HOT SURFACE IGNITOR $21.50 |
|
|
Amana Goodman Janitrol Furnace Hot Surface Ignitor 20165703S 20165703 0230K00001 $35.99 |
|
|
White-Rodgers SureLight HOT SURFACE IGNITION Circuit Board Module 50M61-120-03 $149.95 |
|
|
Hot Surface Igniter Ignitor 41-412 Norton Goodman $38.68 |
|
|
Coleman Mobile Home Furnace Hot Surface Ignitor $35.00 |
|
|
S1-02529084700 HOT SURFACE IGNITOR for older YORK GAS PKG UNITS $17.85 |
|
|
Universal Hot Surface Ignition Module $125.00 |
|
|
LOCHINVAR PLT2702 HOT SURFACE IGNITOR RCO38 SIC 0220 $89.00 |
|
|
White Rodgers Hot Surface Ignitor 767A-370 NOS L37-816 $19.99 |
|
|
Nordyne Gas Furnace Spiral Hot Surface Ignitor Glow Miller Intertherm $33.99 |
|
|
UNIVERSAL HSIURK120VF UNIVERSAL HOT SURFACE IGNITOR KIT $29.99 |
|
|
Honeywell Q3200U1004 Glowfly Universal Hot Surface Igniter. Single Kit $39.95 |
|
|
HOT SURFACE IGNITOR IG1121 GOODMAN B1401015 B1401018S NEW FREE SHIPPING $19.95 |
|
|
Hot Surface Igniter OEM Coleman York EVCor 120V L38-325 $13.00 |
|
|
GIBSON MILLER GAS FURNACE HOT SURFACE IGNITOR $64.99 |
|
|
FENWAL IGNITION MODULE 35-652505-003 WATER PIK LAARS 24 VOLT HOT SURFACE $100.00 |
|
|
NEW HONEYWELL UNIVERSAL HOT SURFACE IGNITER FOR RESIDENTIAL GAS FURNACES $8.50 |
|
|
Silicone Nitride Universal Hot Surface Igniter Kit, Replaces over 100 Igniters! $31.53 |
|
|
PACKARD IG1106 GSW JOHN WOODS 86483 HOT SURFACE FURNACE IGNITOR IGNITER NEW $19.00 |
|
|
MARS FLAT 67918 41-407 ROBERTSHAW NORTON HOT SURFACE FURNACE IGNITOR IGNITER $15.00 |
|
|
PACKARD IG0561 WHITE RODGERS 767A 301 HOT SURFACE FURNACE IGNITOR IGNITER NEW $15.00 |
|
|
LUXAIRE NORTON ROUND 601 HOT SURFACE IGNITER FURNACE IGNITOR NEW $22.00 |
|
|
PACKARD IG1406 WEIL MCLAIN NORTON ROBERTSHAW HOT SURFACE FURNACE IGNITOR IGNITER $15.00 |
|
|
MARS UNIVERSAL ROUND HOT SURFACE GAS RANGE FURNACE IGNITOR IGNITER 67969 NEW $22.00 |
|
|
2 NEW Honeywell Universal Hot Surface Igniters REPLACES 110+ Models CQ8000A1009 $49.97 |
|
|
NEW Honeywell Universal Hot Surface Igniters REPLACES 110+ Models CQ8000A1009 $27.50 |
|
|
Hot Surface ignitor Rheem part # 62-22868-93 $30.00 |
|
|
SMARTVALVE SV HOT SURFACE IGNITER SMART-LITE GAS FURNACE 24V NEW $16.00 |
|
|
Robertshaw/Uni-Line Hot Surface Furnace Ignitor 41-403 $19.99 |
|
|
Trane American Standard IGN00054 hot surface ignitor $29.95 |
|
|
Trane American Standard Norton hot surface ignitor IGN00030 271 XV XL 80 90 95 $19.95 |
|
|
FENWAL 05-326266-053/832-007 HOT SURFACE AUTOMATIC IGNITION SYSTEM 168984 $18.00 |
|
|
Trane Norton 201 Hot surface Ignitor IGN00026 Carrier $29.95 |
|
|
Trane IGN00023 Hot Surface Ignitor Norton Carrier 271 N $24.95 |
|
|
Coleman Gas Furnace Hot Surface Ignitor Igniter 025-41021-000 S1-02541021000 $36.99 |
|
|
Coleman Gas Furnace Hot Surface Ignitor Igniter 1474-052 1474-0521 1474-052P $36.99 |
|
|
Norton Gas Furnace HSI Hot Surface Ignitor Igniter 201N 0748 201N0748 201N-0748 $36.99 |
|
|
White Rodgers hot surface ignitor 767A-357 $19.99 |
|
|
NEW UNI-LINE 41-414 HOT SURFACE IGNITOR $29.95 |
|
|
NEW UNI-LINE 41-403 HOT SURFACE IGNITOR $29.95 |
|
|
Hot Surface Ignitor 41-401 AMANA 10041601 $23.45 |
|
|
Hot Surface Ignitor Robertshaw 41-408 Trane B340039P01 $20.99 |
|
|
Universal Silicon Carbide Hot Surface Igniter/Ignitor $20.99 |
|
|
Hot Surface Ignitor Rheem OEM 62-22868-93 Norton 201N Furnace Heater HSI Igniter $30.00 |
|
|
Furnace Ignitor Igniter Hot Surface Nordyne York Miller $57.67 |
|
|
Norton Gas Furnace HSI Hot Surface Ignitor Igniter 271N 0834 271N0834 271N-0834 $24.99 |
|
|
Norton Gas Furnace HSI Hot Surface Ignitor Igniter 271N 0034 271N0034 271N-0034 $24.99 |
|
|
Norton Gas Furnace HSI Hot Surface Ignitor Igniter 271H 0834 271H0834 271H-0834 $24.99 |
|
|
Norton Gas Furnace HSI Hot Surface Ignitor Igniter 271M 0828 271M0828 271M-0828 $24.99 |
|
|
Carrier Bryant Payne Day & Night Furnace Hot Surface Ignitor Igniter LH33ZS004 $24.99 |
|
|
Carrier Bryant Payne Day & Night Furnace Hot Surface Ignitor Igniter LH33ZS003 $24.99 |
|
|
Carrier Bryant Payne Day & Night Furnace Hot Surface Ignitor Igniter LH33ZS002 $24.99 |
|
|
Carrier Bryant Payne Day&N Furnace Hot Surface Ignitor Igniter LH33ZS001 41-409 $24.99 |
|
|
Carrier Bryant Payne Trane Ducane Gas Furnace HSI Hot Surface Ignitor IG1409 $19.90 |
|
|
Weil Mclain Furnace Boiler HSI Hot Surface Ignition Ignitor Igniter 511-330-139 $21.75 |
|
|
Lennox Armstrong Ducane Furnace Hot Surface Ignition Ignitor Igniter 20015201 $19.90 |
|
|
ICP Heil Tempstar Furnace Hot Surface Ignition Ignitor Igniter 1380672 1380680 $19.90 |
|
|
NIB Spiral Gas Furnace Hot Surface Ignitor HSI York Ect $23.99 |
|
|
Rheem Ruud 120Volt Hot Surface Ignitor 62-22868-93 $20.99 |
|
|
GOODMAN B1401018S HOT SURFACE IGNITOR GENUINE OEM NEW $25.95 |
|
|
HOT SURFACE IGNITOR IG1411 RHEEM 62-22868-82 41-411 NEW FREE SHIPPING $19.95 |